| Usage: | Electrofusion Pipe Fittings Connection | After-sales Service Provided: | Free Spare Parts, Field Installation, Commissioning And Training, Field Maintenance And Repair Service, Online Support, Video Technical Support |
|---|---|---|---|
| Warranty: | One Year | Working Range: | 20-1000mm, 15KW |
| Welding Output Voltage: | 8-75V | Package Type: | Wooden Box |
After power on, the welding machine automatically enter to the welding interface as shown below, move the cursor by left and right shift, pressing the "OK" button after the cursor moves to the corresponding parameters is selected, then the parameters in a flicker state.
Through the up and down keys to modify the parameter value, press the "OK" key to save the data value. If you press the "ESC" key to discard modification, the data will revert to the data value before modified. Setting the value of "1.03 pipe resistance" is equal to the corresponding resistance of pipe.
After the welding parameters are set, move the cursor to "RUN" and press "OK" to enter the welding process.
Note: Set “1.03 pipe resistance” to 0 if you don’t know the pipe resistance, only the open circuit fault (the pipe resistance is greater than 20 ohms or output current is 0) is detected during pipe detection. But this setting will disable the function of "pipe resistance identification alarm”, so can not be set when necessary.| Input power supply | Rated input voltage | 220V±20% |
| Rated input frequency | 45～65Hz | |
| Output power supply | Rated output voltage | Refer to type definition |
| Output power | Refer to type definition | |
| Control characteristics | Control mode | Constant voltage, constant current |
| Electric quantity constant precision | ≤±0.5% | |
| Time control precision | ≤±0.1% | |
| Temperature measuring precision | ≤1% | |
| Scan bar code | Scan 24 bit bar code conform to ISO 13950-2007 | |
| Ambient | Ambient temperature | -20～50℃ |
| Storage temperature | -30～70℃ | |
| Humidity | 20%～90%RH，no condensation | |
| Vibration | ＜0.5G, no violent vibration and impact | |
| Altitude | ＜1000m AMSL, when≥1000m de-rate in accordance with GB/T3859.2-93 |
630mm Welder Machine Using For HDPE Plastic Pipe Jointing Heater
* High-level MCU is used as control core, with abundant parameter setting, measuring and perfect protective function;
2 Multiple phases welding
If the pipe process requires multiple phases welding, it is necessary to modify the "setting parameters" → the parameter value equal to the desired segment value of "1.02 welding number setting".
For example: pipe resistance 0.4Ω, constant voltage mode, 3 welding, the first phase: 35V /150 seconds, the second: 40V /250 seconds, the third: 40V /280 seconds, cooling time is 100 seconds.
First, we need to modify the value of “1.02 welding phase number set " to 3, set the value of " 1.03 pipe resistance " to 0.4Ω, set the value of "1.04 welding parameters" to 35V, and then set the value of "1.05 1st welding time" to 150 seconds. This completes the first phase of the welding settings. Finally, you need to set the value of "1.16 pipe cooling time" to 100 seconds. And then the setting of welding parameters is completed. Press the "ESC" button to return to the standby welding interface, you can see the parameters value and time value are the same with the previous settings. Move the cursor to "RUN" and press "OK" to enter the welding process. The operation steps are shown below:
The product is the sepecial connecting device used to polythene pressure and non-pressure pipe electrofusion or soket connection.
